Hotrod
Construction
Rules
1) Cars to be
1/12th scale Mardave V12 series chassis with any
commercially
available body shell.
2) Any make of
servo saver may be used on the steering servo.
3) Any make of
track rod or ends may be used.
4) The tyres may be changed from the original kit tyres
5) ABS body shells
are allowed, all windows must be cut out or clearly
defined. Polycarbonate body shells are allowed,
windows must remain clear, not
tinted or maybe cut out.
6) Ball races
allowed on rear axle only. Rear axle and spur gear must remain
as kit.
7) Chassis and
front and rear wheel carriers and suspension springs to be as
kit. Countersunk screws must not be used on the
underside of chassis.
8) Any
commercially available speed controller may be used, must have reverse
fitted and working. Mechanical to have a maximum
retail price of £30, Electronic
£60. Receiver battery packs are allowed.
9) Only nine extra
holes (max. 3mm) may be drilled in the chassis, two holes
must be used for mounting the steering servo, two
holes to be used for mounting
an on/off switch, and one hole to mount the
aerial tube, and a max of four holes
for alternative battery mounting, if any of
these items are not used, then the
holes must not be drilled. Any holes drilled and
not used must be filled.
Chassis top
mounting plate may be changed, altered or removed.
10) The motor may
be fitted to either side of the chassis, providing that
there is no modification or alteration to the
chassis or mounting blocks.
11) External front
and rear bumpers are not allowed.
12) Min 20mm. Max
26mm width of tyres and Max 60mm diameter no Min
diameter
of tyres, but the tyre must cover the wheel. Any foam tyre
compound allowed. A
minimum ground clearance of 3mm.
13) Cells will be
provided prior to every race.
14) Motors must be
Mabuchi RS540SH or the V14 only and must remain unopened.
External motor
bearings or fine pitch gears are not allowed. No physical
internal alterations to the motor brushes or cranking
the com. Any one found
doing so will be banned for one season.